MD Membrane Air Dryer CFC-Free, Hollow Fiber Membrane Fine Dryer (Membrane Compressed Air Dehumidification Device)

MD15 to MD75 / MD15-F to MD75-F /
MD15-AF to MD75-AF

Outlet Air Flow
21 to 573L/min
Purge Air Flow
14 to 80L/min
Outlet Air Dew Point
–26 to –12 °C (under atmospheric pressure)
  • No electricity required.
  • Confirm dehumidification conditions with the dew point indicator.
  • No vibration, no heat output, and easy maintenance.

This products is available for purchase online.

MD25-F
MD25-F Micro-Mist Filter Including Manual Drain
Compact, Lightweight, and Space Saving

Required set up space is about 1/5 and dryer weight is less than 1/10 that of conventional dryers. (Compared with ORION refrigerated air dryers.)

Specifications

MD 15 15-F 15-AF
Fine Dryer Only Including Manual Drain Including Auto Drain
Operating conditions Operating Fluid Compressed air
Operating Range MPa 0.2 to 0.85
Inlet Air Temperature ℃ -20 to 55
(Not frozen)		 5 to 55
Ambient Temperature ℃
Standard Specifications Ambient Temperature ℃ 30
Inlet Air Temperature ℃ 28
Inlet Air Water-Vapor Content 28 °C, saturated
Inlet Air Pressure MPa 0.69
Purge Air Flow L/min 14
Outlet Air Flow L/min 106
Outlet Air Dew Point (at atmospheric pressure) ℃ –10 or lower
Piping Size / Purge Air Outlet Port Size Rc1/4 / Rc1/8
Micro-Mist Filter - Standard Equipment
Degree of Filtration / Collection Efficiency µm/% - 0.01 / 99
Mass kg 0.4 0.9 1.0
MD 25 25-F 25-AF
Fine Dryer Only Including Manual Drain Including Auto Drain
Operating conditions Operating Fluid Compressed air
Operating Range MPa 0.2 to 0.85
Inlet Air Temperature ℃ -20 to 55
(Not frozen)		 5 to 55
Ambient Temperature ℃
Standard Specifications Ambient Temperature ℃ 30
Inlet Air Temperature ℃ 28
Inlet Air Water-Vapor Content 28 °C, saturated
Inlet Air Pressure MPa 0.69
Purge Air Flow L/min 27
Outlet Air Flow L/min 106
Outlet Air Dew Point (at atmospheric pressure) ℃ –17 or lower
Piping Size / Purge Air Outlet Port Size Rc1/4 / Rc1/8
Micro-Mist Filter - Standard Equipment
Degree of Filtration / Collection Efficiency µm/% - 0.01 / 99
Mass kg 0.4 0.9 1.0
MD 75 75-F 75-AF
Fine Dryer Only Including Manual Drain Including Auto Drain
Operating Conditions Operating Fluid Compressed air
Operating Range MPa 0.2 to 0.85
Inlet Air Temperature ℃ -20 to 55
(Not frozen)		 5 to 55
Ambient Temperature ℃
Standard Specifications Ambient Temperature ℃ 30
Inlet Air Temperature ℃ 28
Inlet Air Water-Vapor Content 28 °C, saturated
Inlet Air Pressure MPa 0.69
Purge Air Flow L/min 80
Outlet Air Flow L/min 318
Outlet Air Dew Point (at atmospheric pressure) ℃ –17 or lower
Piping Size / Purge Air Outlet Port Size Rc1/2 / Rc1/4
Micro-Mist Filter - Standard Equipment
Degree of Filtration / Collection Efficiency µm/% - 0.01 / 99
Mass kg 0.9 1.5 2.0
  • Purged air can be piped out.
  • Please consult your dealer regarding processing fluids other than compressed air.
  • When using the separate Fine Dryer, be sure that water droplets and oil are removed from air entering the dryer.
  • Air flow is based on conditions of air entering the air compressor. (Atmospheric pressure, 32 °C, 75%)
  • This product should not be used with air that is adulterated with chemicals such as corrosive gases, organic solvents, etc., nor in an environment that contains such compounds.
  • When used with a oiled compressor, the output of the compressor should be equipped with an oil mist separator.
  • Please contact us for details.