TH Air Cooled Aftercooler
(1.7 to 30 m3/min)The Optimum Aftercooler for Supplementary Cooling of Compressed Air

Air Cooled
SE-250A-G1 /
SE-750 / SE1500 / SE3000

Air Processing Capacity
1.7 to 30m3/min
Maximum Inlet Air Temperature
80℃
Compatible Air Compressor
11 to 150kW
  • Wide profile condenser for easy maintenance.
  • Uses corrugated fins.
    This low-profile heat exchanger with good heat transfer efficiency has a high air-contact surface area and exhibits excellent cooling capacity.
  • Uses a special fan design exhibits consistent air flow.
SE-250A
SE-250A

Specifications

SE-250A-G1 SE-750 SE1500 SE3000
Air Processing Capacity m3/min 1.7 6.9 15 30
Inlet Air Conditions Maximum Inlet Air Temperature ℃ 80
Pressure (Gauge pressure) MPa 0.69 0.83
Ambient Temperature ℃ 32
Outlet Air Temperature ℃ 40 42
Maximum Operating Pressure (Gauge pressure) MPa 0.98
External Dimensions Height mm 685 766 1305 1619
Depth mm 298 353 770
Width mm 730 1170 1314 2496
Mass kg 28 60 Approx. 160 Approx. 410
Electrical Specifications Voltage (50/60 Hz) V Single-phase 100 Single-phase 200
Power Consumption (50/60 Hz) W 63/76 230/280 460/560 920/1120
Electric Current (50/60 Hz) A 0.7/0.8 1.24/1.30 2.48/2.60 4.96/5.20
Blower Fan Output W 25 85×2 85×4 85×8
Air Inlet/Outlet Connection Port Size 1B/25A union Fitting 2B/50A union fitting 2B union fitting 3B union fitting
Drain Outlet Port Size Rc1/2 R1/2 R1/2×2
  • Please contact us for guaranteed performance specifications.
  • The value for air processing capacity is calculated based on air compressor intake conditions. (Atmospheric pressure, 32 ℃, 75%)
  • Please contact ORION regarding custom built models with specifications outside the ranges listed herein.