SE Air Cooled Aftercooler
(1.0 to 6.9 m³/min)Aftercooler for Heatless Air Dryer

Built to Order

			SE90		SE150		SE320		SE600
Air Processing Capacity		m³/min	1.0		1.7		3.7		6.9
Inlet Air Conditions	Maximum Inlet Air Temperature	℃	70
	Pressure (Gauge pressure)	MPa	0.7
	Ambient Temperature	℃	32
Outlet Air Temperature		℃	50 or lower
Maximum Operating Pressure (Gauge pressure)		MPa	0.98
External Dimensions	Height	mm	595		642		610		712
	Depth	mm	300		298		333		353
	Width	mm	440		730		770		1170
Mass		kg	19		28		34		60
Electrical Specifications	Voltage (50/60 Hz)	V	Single-phase 200		Single-phase 100		Single-phase 200		Single-phase 200
	Power Consumption (50/60 Hz)	W	35/40		65/64		150/180		230/280
	Electric Current (50/60 Hz)	A	0.15/0.20		0.8/0.7		0.90/0.95		1.24/1.30
Blower Fan Output		W	25		25		85		85×2
Air Inlet/Outlet Connection Port Size			1/2B union fitting		1B union fitting		1 1/2B union fitting		2B union fitting
Drain Outlet Port Size			R1/2		Rc1/2				R1/2
Compatible heatless air drier			When deciding the processing capacity of your heatless air dryer, make your choice based find the correction coefficient for operation at 50 ℃.
Air Processing Capacity ≧ Operating Air Flow ÷ Pressure Correction Coefficient			■ Aftercooler Pressure Correction Coefficient Chart (Be sure to add some leeway for your final choice.)
			Pressure (MPa)	0.39	0.49	0.59	0.69	0.78	0.88	0.98
			Pressure Correction Coefficient	0.63	0.75	0.88	1.0	1.07	1.13	1.2

The value for air processing capacity is calculated based on compressor intake conditions. (Atmospheric pressure, 32 ℃, 75%)
Please contact us for guaranteed performance specifications.
When using as an aftercooler for the QSQ dryer, always install a Super Drain Filter on the outlet side.
A separate drain trap should be installed when used with dryers other than the QSQ series.
Please use in ambient temperatures of 40 ℃ or below.
The highest design inlet temperature is 80 ℃.

SE Air Cooled Aftercooler(1.0 to 6.9 m3/min)Aftercooler for Heatless Air Dryer